Owner manual

Getting Started
Your Aegis Padlock Pro is preformatted in NTFS for Windows
®
and is ready
for use. For the Mac OS please refer to the directions on the following
page to reformat your drive to a compatible format. To access the Aegis
Padlock Pro plug your drive into a powered eSATA or USB port, enter the
default PIN number of 123456 and press .
The indicator light will change from RED to GREEN indicating the drive is
unlocked and can be accessed.
Changing the ADMIN PIN number to your own unique PIN number
Youarethe“administrator”ofthisdrive.Therstthingyouwillwantto
do is change the Administrator PIN number from the default 123456 to a
unique, secure PIN number that you will remember.
To change the Admin PIN number follow the instructions below:
ToenterAdminMode,rstplugthedriveintotheUSBportandwait1.
until the LED light turns RED.
Next, press and hold 0 + for 5 seconds until the LED light 2.
ashesRED.
Enter the Admin PIN number (default is 123456) and press . 3.
The LED light will turn BLUE indicating you are in Admin Mode.
While in Admin Mode, press and hold 9 + until the LED light 4.
ashesBLUE.
Enter the new PIN number (minimum 6 digits) and press . The 5.
LEDlightwillashGREEN3timesifsuccessful.
Re-enter the new PIN number and press . The LED light will stay 6.
solid GREEN for 2 seconds and then solid BLUE indicating you have
successfully changed the Admin PIN.
To exit admin mode and begin using your Aegis Padlock Pro drive, 7.
press the CANCEL button until the LED turns RED. Now enter your
new PIN number and press .