Manual

Diagnostic Mode

The keypad has a manual diagnostic mode built in to verify proper keypad

function. This mode will not allow access to any data or admin function. It

can only be used to identify the rmware level and to test button recognition.

The diagnostic mode is also useful for troubleshooting key issues.

To enter the diagnostic function:

1. During Power up hold 0 key until the Power-On-Self-Test (POST)

completes.

2. The LED will ash BLUE for the major and minor revisions and RED LED

to indicate (.) When complete, the LED will return to a solid BLUE LED

(Example: Four BLUE ashes followed by one RED ash followed

by one BLUE ash followed by one RED ash would indicate

version 4.1.)

3. Key presses after the revision will coincide with the number pressed

using the BLUE LED.

4. Example 1 = 1 ash, 2 = 2 ashes, 3 = 3 ashes,…. 0 = 10 ashes

5. Unlock = 11 ashes, Lock = 12 ashes.

6. To Exit the Diagnostic Mode, a power re-set is required. Unplug and

re-plug the USB cable to return to normal operation.