User Manual
Aegis
Padlock
Quick Start Guide
0
cancel
2
abc
5
jkl
6
mno
9
wxyz
8
tuv
7
pqrs
4
ghi
3
def
1
1
2
3
3
1
2
Cancel button
button
LED Indicator light
Remember to save your password in a safe place. If
lost or forgotten, there is no way to access the drive.
If you are having diculty please refer to the com-
plete user’s manual which is loaded on your Aegis
Padlock drive and is also available at Apricorn’s
website at: www.apricorn.com/support
Your Aegis Padlock is preformatted in NTFS for Windows
®
and is ready for use. For the Mac OS
please refer to the directions on the reverse to reformat your drive to a compatible format.
To access the Aegis Padlock plug your drive into a powered USB port, enter the default PIN
number of 123456 and press .
The indicator light will change from RED to GREEN indicating the drive is unlocked and can be accessed.
Changing the ADMIN PIN number to your own unique PIN number
You are the “administrator” of this drive. The rst thing you will want to do is change the
Administrator PIN number from the default 123456 to a unique, secure PIN number that you
will remember.
To change the Admin PIN number follow the instructions below:
To enter Admin Mode, rst plug the drive into the USB port and wait until the LED light
1.
turns RED.
Next, press and hold 0 + for 5 seconds until the LED light ashes RED.
2.
Enter the Admin PIN number (default is 123456) and press . The LED light will turn 3.
BLUE indicating you are in Admin Mode.
While in Admin Mode, press and hold 9 + until the LED light ashes BLUE.
4.
Enter the new PIN number (minimum 6 digits) and press . The LED light will ash 5.
GREEN 3 times if successful.
Re-enter the new PIN number and press . The LED light will stay solid GREEN for 2
6.
seconds then solid BLUE indicating you have successfully changed the Admin PIN.
To exit admin mode and begin using your Aegis Padlock drive, press the CANCEL
7.
button until the LED turns RED. Now enter your new PIN number and press .