Manual

Quick Start Guide
Attention: Use only the included cables with your Aegis Portable. You might
damage the drive if you use a cable not included with the Aegis Portable.
In the rare case that the Aegis
Portable does not power up
on a single USB connection,
the included USB Y-cable may
be required (pictured right).
Simply plug the two Y-cable
USB connectors (black and grey
connectors) into the two USB
ports on your notebook, connect
the Aegis Portable, and the drive
will power.
Powering the Aegis Portable using the USB Y-cable
Package contents
• Aegis Portable
• Travel pouch
Quick Install
Aegis Portable
• USB Y-Cable
• Software CD
1. Ensure your computer’s power is turned on.
2. Plug the Aegis Portable USB or FireWire cable into the appropriate open
port on your computer.
3. The New Hardware Foundmessagemayappearbrieyonyourcomputer
screen.
4. The Aegis Portable drive icon will appear in My Computer for Windows or
on the Desktop for Mac.
5. Your new Aegis Portable is now ready for use.