Owner manual

ManualsBrandsApricorn ManualsStorageAegis Secure Key - USB 2.0 Flash Drive

1 2

5 6

9 0

Apricorn Aegis Secure Key

Quick Start Guide

Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis

Secure Key works by simply entering your desired 7-15 digit PIN directly onto

the onboard keypad. The Aegis Secure Key can then be connected to any

USB port on any computer. Should the drive be lost or stolen, the user can

rest assured that all data held on the Aegis Secure Key is safe and cannot

be accessed by any unauthorized third party

The full manual is located on the Aegis Secure Key. We recommend that you

unlock the Key and download the manual first before making any changes.

The manual can also be found at http://www.apricorn.com/, then select

Aegis Secure key.

Introduction

Unlocking the Key

1. Press the Key button

2. Within 10 seconds enter the User PIN

(Factory default PIN: 1-1-2-2-3-3-4-4)

3. Press the Key button will blink for a correct PIN entry

will blink for an incorrect PIN entry

4. Connect the Aegis Secure Key to a

USB port within 30 seconds will be on

will blink together

will be on or blink for activity

5. To lock the Aegis Secure Key, Unplug

it from the USB port.

Even though the Aegis Secure Key can be used straight out of the box with the

default PIN 1-1-2-2-3-3-4-4, we highly recommend that a new User PIN is

configured immediately by following instructions below, for security reasons.

Changing your PIN code

1. Press the Key button

2. Within 10 seconds enter the User PIN

and press the Key button

(Factory default PIN: 1-1-2-2-3-3-4-4)

4. Enter a new PIN number

And press the Key button

6. Re-enter the new PIN number

and press the Key button

will blink together

will blink if the new PIN is accepted and

The Key is unlocked & ready to use

will blink together

will blink for a correct PIN entry

will blink for an incorrect PIN entry

3. Press and hold the Key button

for 3 seconds

will be on solid

will blink alternately if the new

PIN was not accepted

Note: The batteries are not fully charged when you receive your Aegis Secure

Key. The battery should be charged prior to first use. Please plug in the Key to a

powered USB port for 90 minutes to fully charge your battery

Summary of content (2 pages)

PAGE 1
Apricorn Aegis Secure Key Quick Start Guide Introduction Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis Secure Key works by simply entering your desired 7-15 digit PIN directly onto the onboard keypad. The Aegis Secure Key can then be connected to any USB port on any computer.
PAGE 2
Quick Start Guide (continued) Resetting your Aegis Secure Key In case the User PIN has been forgotten, or if you would like to delete all data stored on the Key and configure a new User PIN, follow the instructions below. The reset process will clear all PINs and encryption keys and destroy all data. This means a new User PIN will have to be defined in order to re-enable the Key. Also, since this will force the creation of a new encryption key, the Aegis Secure Key will have to be reformatted.