manual

Note: if blink alternately you will need to start over from step 3.

9. Adding a User PIN code in Admin mode

1. Enter the admin mode

3. Press and hold the Key button

for 3 seconds

4. Enter a new PIN number

to store the new PIN

6. Re-enter the new PIN number

7. Press the Key button

to confirm the new PIN

will be on

Press the Key button

will double blink together

will double blink

will blink if the new PIN is accepted and

the Key is unlocked & ready to use

Will blink alternately if the new

PIN was not accepted

A user PIN (Personal Identification Number) can be changed to almost any number

that is desired. To create your new PIN be sure to follow the instructions below

1. The new PIN is 7 to 15 digits long.

2. The new PIN can not contain all repeating numbers (3-3-3-3-3-3-3)

3. The new PIN can not have sequential numbers (1-2-3-4-5-6-7) or 7-6-5-4-3-2-1

Instructions LED Activity

Apricorn Aegis Secure Key

8. Unlocking the Aegis Secure Key in Admin mode

1. Press the Key button 2 times

will be on or blink for activity

5. To lock the Aegis Secure Key, Unplug

it form the USB port.

Instructions LED Activity

will double blink together

will double blink if correct

(The user PIN is now erased)

will blink if incorrect

2. Within 10 seconds enter the Admin PIN

3. Press the Key button

4. Connect the Aegis Secure Key to a

USB port within 30 seconds

will be on

Page 7