Owner manual

10
11
www.apricorn.com
www.apricorn.com
Cloning your hard drive with EZ Gig
1. Click the “Let’s Get Started” button to proceed.
2. EZ Gig will then scan for connected drives. This may take a few
moments.
Selecting the Source Drive
Once EZ Gig has scanned for connected drives, you will be asked to select
your Source Drive. This is the drive you would like to copy from and in
most cases is the internal drive in your notebook.
NOTE: Your computer’s internal drive will usually be denoted by the
prex AHCI or IDE.
Select the appropriate drive from the menu and click “Next” to continue.