User guide

Uninstalling NovaDisk

An uninstall utility is provided with NovaDisk. This program provides a one-

step removal of your NovaDisk program group and associated files. You

may select two different levels of uninstall: Selective (removes only the

program installation & leaves backup files intact), or Complete (removes the

entire NovaDisk group and all backup files).

To run the uninstall utility, simply click on the uninstaller icon located in the

NovaDisk program group.

EZ-GIG Drive Overlay

If you need to restore your EZ-Backit onto a new, larger drive and your

system locks-up during boot, try installing a Drive Overlay. Some older

computers DO NOT support hard drives larger than 8GB. For this reason,

we have included Drive Overlay software on the EZ-GIG diskette.

EZ DRIVE software from Micro House has been included on the EZ-GIG

diskette:

Creating the EZ DRIVE diskette:

1) Insert the EZ-Backit diskette into the floppy drive. Open the diskette

under My Computer or Windows Explorer.

2) Copy and Paste the file “EZDRIVE.EXE” to your desktop. A new icon

will appear.

3) Double click on the new desktop icon and follow the instructions. You

will need a 1.44MB 3.5” floppy disk. Do not use the EZ-Backit Data Transfer

diskette for this purpose.

Installing EZ Drive Software to your NEW Hard Drive After EZ-GIG

1) Boot your computer with the EZ DRIVE diskette in your floppy drive.

2) From the ‘Main Menu’ choose‘ Advanced Options’.

3) Choose ‘EZ-BIOS setup from the ‘Advanced Options Menu’.

4) Press the ‘Y’ key to install the EZ-BIOS translation fix.

5) Exit EZ DRIVE.

6) Remove floppy diskette from floppy drive.

7) Reboot your computer.