User guide

EZ-GIG Drive Copy

Source Drive: Destination Drive

Internal, Primary IDE, External, PCMCIA Socket 0

TOSHIBA MK2104MAV IBM-DCXA-21000

Serial number: 77S50007 Actual C/H/S: 16383/16/63

Logical C/H/S: 525/128/63 Logical C/H/S: 1299/240/63

Megabytes: 2167 Megabytes: 10056

Access mode: BIOS, CHS Access Mode: IDE direct, LBA

Begin Transfer? (Y/N or CTRL-U for Utility menu) >_

EZ-GIG drive-copy software creates an exact, bootable copy of your

hard drive on the EZ-Backit Pro. To Use EZ-GIG:

1) Turn the laptop OFF (make sure it’s not in Sleep or Suspend

mode).

2) Remove all other PCMCIA cards from your notebook.

3) Flip open the EZ-Backit unit.

Slide the PCMCIA connector

into one of your laptop’s

PCMCIA slots (EZ-Backit fits

a type-II PCMCIA slot). Note

label “this side up” on

PCMCIA connector !

4) Insert the EZ-Backit Diskette

into the floppy drive.

5) Turn the laptop on, and wait for the EZ-Backit program to load.

6) Drive Detection: Once the EZ-Backit software loads, it will au-

tomatically search for a “Source” and “Destination” hard drive,

and display the disk information on your screen.

(See example below)