User guide

7) Review the drive information on the screen before starting a

copy. (Transfer settings may be modified from the utilities

menu - see pg. 14).

8) Copy: Start the drive copy by pressing “Y” (a status line at

the bottom of the screen will display information about the

transfer-in-progress)

9) Once the EZ-GIG transfer is finished, the status line at the

bottom of the screen will display a completion message.

10) Remove the Floppy diskette, and turn the computer off.

EZ-Backit now contains an exact copy of your internal drive!

NOTE: EZ-GIG is a “drive-to-drive” copy. Once you begin a copy, it

will overwrite everything on the Destination Drive. For help with EZ-

GIG settings, error messages and other troubleshooting tips - please

see pgs 12-15

Elapsed Time = ## minutes ## seconds

Data has been successfully transferred.

Remove floppy diskette, turn computer off and install new drive.

Press <CTRL-Q> to cancel process

Copying partition 1 of 1, 289 of 3754 files transferred, 8% done

EZ-GIG Drive Copy