User Guide

The Leader in Personal Storage12
Cloning your hard drive with Disk Clone
EZ Gig II allows you to clone your hard drive from inside the window
operating system or by booting directly to the Data Protection Suite CD
provided in the kit. If your system is running normally we recommend
that you clone your hard drive by starting up the program inside the
windows operating system.
1. Ensure your EZ Bus DTC is connected to your computer.
2. To start EZ Gig II, click Start > Programs > Apricorn > EZ Gig II
and click on Apricorn EZ Gig II. This will open the main screen of
EZ Gig II. You can also click on the Apricorn EZ Gig II icon on the
Desktop.
3. Under New Disk Deployment on the main screen double click on the
“Disk Clone” icon to open Disk Clone Wizard.
4. When you see the “Welcome to the Disk Clone Wizard!” screen.
Click Next to continue.
Read all instructions carefully before cloning. This is only
a quick overview of how to use Disk Clone. For detailed
instructions, read Chapter 7. “Transferring the system to
a new disk” located in the EZ Gig II manual located on the
Data Protection Suite CD