User Guide
www.apricorn.com 33
6. DISCONNECTING
Windows 2000 and XP
1. Click on the
Safely Remove Hardware
icon in the system
tray.
2. Follow the computer screen instructions to remove your EZ Bus
DTC from your computer.
To protect against unexpected data loss, Windows veries that all
les on the disk are closed before allowing the USB or FireWire
device to be removed. If you receive an error message that says
“The device cannot be stopped right now
. Try stopping the
device again later.”
Close all programs that are using les from
the drive, then repeat steps 1 and 2.
Macintosh
1. The drive will need to be dismounted. This can be done by dragging
the drive to the
Trash Can
.
2 Wait a few seconds. Once the LED has turned off, you can safely
remove the drive.
To protect against unexpected data loss, OS X veries that all les
on the disk are closed before allowing the device to be removed. If
you receive an error message that says “The disk “EZ Bus DTC ”
is in use and could not be ejected”
.
Close all the programs that
are using les from the drive, then repeat steps 1 and 2.