User Guide

www.apricorn.com 9
4. CONNECTING YOUR EZ BUS DTC
You have two choices for setting up your EZ Bus DTC, USB or FireWire
connection:
For USB:
1. Connect the USB cable to the USB port at the rear of the EZ Bus DTC
and to an available USB Port on your computer.
2. Connect the AC adapter at the rear of the EZ Bus DTC and then plug
into an available wall outlet or power strip.
3. Push the on switch located on the front of the EZ Bus DTC. The
indicator light will come on to let you know that the EZ Bus DTC is
powered.
For FireWire:
1. Connect the FireWire cable to the FireWire port at the rear of the EZ
Bus DTC and to an available FireWire Port on your computer.
2. Connect the AC adapter at the rear of the EZ Bus DTC and then plug
into an available wall outlet or power strip.
3. Push the on switch located on the front of the EZ Bus DTC. The
indicator light will come on to let you know that the EZ Bus DTC is
powered.