User Guide

Appendix B Hard disks and BIOS setup
54
AwardBIOS Setup Utility
Main
Primary Master [Auto] Item Specific Help:
Type [Auto] <Enter> to select the type
of the IDE drive.
[User Type HDD] allows
you to set each entry on
your own.
Warning: Ultra DMA Mode
3/4/5 can be enabled only
when BIOS detects
Shielded 80-pin cable.
F1 Help ↓ Select Item -/+ Change Values F5 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
Place the marker on the value of the Type parameter ([Auto] in this case) and press
the Enter key to open the list of possible values of this parameter; for example:
None
Auto
User Type HDD
CD-ROM
LS-120
ZIP-100
MO
Other ATAPI Device
Use the Up and Down keys to select the User Type HDD value and press the Enter
key to get to the following screen:
AwardBIOS Setup Utility
Main
Primary Master [User Type HDD] Item Specific Help:
Type [User Type HDD] <Enter> to select the type
Translation Mode [LBA] of the IDE drive.
Cylinders [………0] [User Type HDD] allows
Head [……0] you to set each entry on
Sector […0] your own.
CHS Capacity 0MB
Maximum LBA Capacity 0MB Warning: Ultra DMA Mode
3/4/5 can be enabled only
Multi Sector Transfer [Maximum] when BIOS detects
SMART Monitoring [Disabled] Shielded 80-pin cable.
PIO Mode [4]
Ultra DMA Mode [5]
F1 Help ↓ Select Item -/+ Change Values F5 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit