User`s guide
21
www.apricorn.com
Aborting the Cloning Process
Interupting the Verication process
If you chose the “Verify Copy” option before starting the clone, EZ
Gig III will automatically compare the information on the “Source” and
“Destination” drives once the clone is complete. If this process is interupted
or stopped at anytime, the aborted verication run will have no inuence on
the copied data. The copy itself is already nished at that point of time.
When the nal report is read, EZ Gig III will report that the clone is only
partially veried.
Interupting the Cloning Process
If the cloning process aborted, a new clone must be commenced.
The cloning process can be stopped at anytime using the “Stop” button.
Continue cloning by clicking “Continue copying”. To stop the clone
completely, select “Abort copying.”