User Guide
12
How to enter your registration number
If SMART-ER was included for FREE on your Apricorn software CD, you
will nd the registration number on the “Install SMART-ER Software”
window. Click on the SMART-ER icon in your system tray (lower
right-hand corner of your desktop). Click on the About Page, click on
the Register Button. Enter your registration number here and click
<OK>. You just successfully registered SMART-ER. Click <OK>.
Note: If you downloaded the trial version of SMART- ER, go to
the FAQ’s section of this guide on page 19 for more information about
how to purchase and register SMART-ER.
Send E-mails on SMART-ER alerts
SMART-ER has a feature that can send out an E-mail if it detects an
error condition. To congure these options, click the check boxes
to enable sending E-mail on SMART error and free space error. This
feature should only be enabled if this computer has a permanent
connection to the internet or is automatically congured to connect
when necessary.
1. Fill in the ‘E-mail From’ eld with your E-mail address.
2. Fill in the ‘E-mail To’ eld with the E-mail address of the person you
want to be notied if an error occurs.
3. Fill in the ‘E-mail Server’ eld with the host name of your SMTP server.
(Check with your ISP for e-mail server settings)
To verify these elds were setup correctly, click on the Send Test E-
mail. The person you setup in the ‘E-mail To’ eld will receive a test
E-mail.