Upgrade Kit for Desktop PCs Owner's manual

www.apricorn.com

Make sure your Velocity Solo is installed

before using EZ Gig

Before starting the EZ Gig software, please ensure that your new solid

state drive is connected installed with your Velocity Solo card. EZ Gig

automatically veries which Apricorn upgrade product is being used. If

used without one of Apricorn’s upgrade products, EZ Gig will not work.

EZ Gig Start Up Options

After downloading EZ Gig from Apricorn’s site, open the EZ Gig program or

double click on the EZ Gig icon to get started. From here you can either:

1. Choose the Start option (go to page 13) OR

2. Create a bootable EZ Gig CD to use in the future (go to page 12 for

instructions).

Creating a Bootable EZ Gig CD

If you downloaded EZ Gig from Apricorn’s website, you have the option

of creating a bootable EZ Gig CD or thumb drive to use in the future.

To create a bootable media disk follow the appropriate directions below:

• To create a bootable CD/DVD, choose the desired drive at ‘CD/

DVD writer’ and click “Create CD/DVD”.

• To create a bootable USB key, choose the desired drive at ‘USB

medium’ and click “Make bootable”.

Follow the instructions and wait until the installation program reports

successful creation of the bootable medium.

Once you have created you bootable media device, click “Exit” and then

choose “Start EZ Gig”.