Upgrade Kit for Desktop PCs Owner's manual

www.apricorn.com

Cloning your hard drive with EZ Gig

1. Click the “Let’s Get Started” button to proceed.

2. EZ Gig will then scan for connected drives. This may take a few

moments.

Selecting the Source Drive

Once EZ Gig has scanned for connected drives, you will be asked to select

your Source Drive. This is the drive you would like to copy from and in this

case is the internal drive in your computer.

NOTE: Both your computer’s internal drive and the drive on the

Velocity Solo will be denoted by the prex AHCI or IDE, so take note

of your new drive’s part number before starting the clone.

Select your computer’s internal drive from the menu and click “Next” to

continue.