User Manual

14 15
INDOOR AIR QUALITY FUNCTIONS
Humidity Control Screen for Humidification in Manual Mode
HUMIDITY CONTROL (CONTINUED)


MANUAL MODE:


FOR VARIOUS OUTDOOR

DONE BUTTON

INDOOR AIR QUALITY FUNCTIONS
HUMIDITY CONTROL (CONTINUED)
If dehumidification is installed the thermostat

control dehumidification with either a whole home
dehumidifier or with the air conditioner (cooling unit).
The thermostat will allow you to set the desired
humidity (% relative humidity) level in your home and


dehumidification setpoint to 60% when first installed.
Allow dehumidification to run until the initial setpoint

humidity setting.
Raise the setting if you prefer the air to be
less dry; this will reduce the amount of time that
dehumidification runs.
Lower the setting if you prefer the air to be
more dry; this will increase the amount of time that
dehumidification runs.

your setting. When first installed, your dehumidifier
has to remove all the moisture that is initially in your
home. The home acts like a sponge so the moisture
in the materials of your home is at the same level
as the air. After drying the air, the materials of the

they are again at the same level. As a result, it is
not uncommon for dehumidification to operate for an
extended period of time when it is first installed.