Living Space Control Model 70 Living Space Control Owner’s Manual For use with Model 1700 Whole-Home Dehumidifier Non-Programmable READ AND SAVE THESE INSTRUCTIONS
I. PRINCIPLE OF OPERATION The Model 1700 Dehumidifier may be difficult to access in locations such as attics and crawlspaces, and you may wish to control the moisture level in a specific area, such as a living room or master bedroom. The Model 70 Living Space Control provides you with a convenient, accessible means of turning the Model 1700 Dehumidifier on and off and allows for adjustment of the dryness level set point.
TO TURN THE MODEL 1700 DEHUMIDIFIER ON Press the “ON” button to enable the Model 1700 Dehumidifier to operate. When the “ON” button is pressed, the display will show a solid “ON”. When the Model 1700 Dehumidifier is actually running, “ON” will blink. NOTE: After initial power-up, the dehumidifier will not run until 2 minutes have elapsed for system initialization. TO TURN THE MODEL 1700 DEHUMIDIFIER OFF Press the “OFF” button to turn the Model 1700 Dehumidifier off.
CLEANING THE LIVING SPACE CONTROL If the surface of the Living Space Control becomes dirty, it can be cleaned with plain water or a non-abrasive household cleaner, including glass cleaner. When using any cleaner, be careful not to get any into the interior of the control. Do not spray any liquid directly onto the control. Spray the cleaner onto a soft cloth and wipe the surface of the control gently. IV.