Owner`s manual

PERIODIC MAINTENANCE
2 - 4
SR 50
FRAME
Type Split single-beam
SUSPENSIONS
Front Telescopic fork
Travel 90 mm (3.54 in)
Rear hydraulic monoshock
Travel 69 mm (2.72 in)
BRAKES
Front Disc - Ø 190 mm (7.48 in) with hydraulic transmission.
Rear Disc - Ø 190 mm (7.48 in) with hydraulic transmission.
WHEEL RIMS
Type alloy
Front 3.50 x 13"
Rear 3.50 x 13"
TIRES
Type tubeless
Front 130/60 – 13" 53J
Rear 130/60 – 13" 53J
STANDARD INFLATION PRESSURE
Front 180 kPa (1.8 bar) (26 PSI)
Rear 200 kPa (2.0 bar) (29 PSI)
INFLATION PRESSURE WITH PASSENGER
(in countries where this is allowed)
Front 180 kPa (1.8 bar) (26 PSI)
Rear 220 kPa (2.2 bar) (32 PSI)
IGNITION
Type C.D.I.
Type / T.D.I.
Spark advance 20 ° ± 3 ° before TDC.
Spark advance / mapped to rpm/a (a = throttle opening)
SPARK PLUG
Standard CHAMPION RN1C
Standard CHAMPION RG6YCA / RG6YC
Standard NGK-R CPR8E
As an alternative / NGK-R ZMR7AP (recommended) / CR8EKB / CR7EKB
Spark plug electrode gap 0.6 – 0.7 mm (0.024 – 0.028 in)
Spark plug electrode gap / 0.9 mm (0.035 in)
ELECTRIC SYSTEM
Battery with maintenance 12 V - 9 Ah
Fuses 7.5 A - 15 A
Fuses 10 A - 15 A
Fuses 10 A
Generator (with permanent magnet) 12 V - 70 W
Generator (with permanent magnet) 12 V - 165 W
Generator (with permanent magnet) 12 V - 140 W
BULBS
Low beam 12 V - 35 W
High beam 12 V - 35 W
Turn indicators 12 V – 10 W
Rear parking / stop light 12 V – 5 / 21 W
Instrument panel lights 12 V - LED
WARNING LIGHTS
High beam 12 V - LED
Turn indicators 12 V - LED
Fuel reserve 12 V - LED
Injection Check / 12 V - LED