Owner`s manual

PERIODIC MAINTENANCE
2 - 14
SR 50
ERROR DESCRIPTION ECU ERROR CODE
Engine overheat
ECU 01
Pick-up sensor failure
ECU 02
Wrong signal from throttle position sensors
ECU 03
Wrong signal from throttle position sensor 1
ECU 04
Wrong signal from throttle position sensor 2
ECU 05
Throttle position sensor 1 malfunction
ECU 06
Throttle position sensor 2 malfunction
ECU 07
Throttle position sensors malfunction
ECU 08
Incorrect charging voltage
ECU 09
Oil pump malfunction
ECU 10
Air injector malfunction
ECU 11
Fuel injector malfunction
ECU 12
Ignition circuit malfunction
ECU 13
Fuel pump malfunction
ECU 14
Engine rpm limiter tripped
ECU 15
Error in ECU power supply
ECU 16
Rpm limiter tripped while starting
ECU 17
Engine temperature sensor malfunction
ECU 18
Error on ECU – throttle sensor connection
ECU 22
Atmospheric pressure sensor malfunction
ECU 23
INSTRUMENT PANEL ERRORS: This menu allows you to
view any current errors (active) or stored (memo) as
detected by the instrument panel.
The presence of an error is indicated by “x”.
To identify the error, please refer to the “instrument panel
error codes” table.
ERROR DESCRIPTION
INSTRUMENT PANEL
ERROR CODE
Immobilizer failure: Key code read but not acknowledged DSB 01
Immobilizer failure: Key code not read (key not available or
transponder broken)
DSB 02
Immobilizer failure: Broken antenna (open or short-circuited) DSB 03
Immobilizer failure: Inner controller failure DSB 04
Fuel sensor failure DSB 05