Owner`s manual

PERIODIC MAINTENANCE
2 - 30
SR 50
2.2.6. MIXER OIL IE361 – C364
TOPPING UP
CAUTION The vehicle fits a separate mixer that mixes fuel
and oil, necessary for lubrication.
• Remove the front cover, see (REMOVING THE
FRONT COVER).
• Remove the plug.
• Fill with oil, see (LUBRICANT CHART).
• Refit the plug.
AIR BLEED
WARNING
If the oil in the mixer oil reservoir is low or if the
mixer oil line - from the mixer to the reed
assembly - is removed, it is necessary to bleed
the system. This must be done to avoid damage
caused by the engine running with air in the
mixer oil system.
• Remove the lower cover, see (REMOVING THE
LOWER COVER).
• Remove the rubber plug.
• Using a screwdriver, loosen the screw inside the mixer.
• Oil is drained by gravity; allow for the oil to flow out
without air bubbles.
• Tighten the screw.
• Refit the cover.