Technical data

Release 00 / 2002 - 09
Air-injection 50 cc
04 / 04Chapter.4
Measure clearance (A) between laminar valve and its housing and size (B).
If clearance (A) is in excess of 0.2 mm (0.008 in), replace the laminar valve.
(B) size is at least 1 mm (0.04 in).
LAMINAR VALVE
A
B
Tighten the gas-wire adjuster and the return-nut (1) carefully.
If the nut is tightened to quickly, the threaded pawl plastic housing may break (2).
1
2