User Guide

17
use and maintenance Atlantic 500
MODE
PA
SSING
3
1
4
2
5
KEY CONTROLS
CONTROLS ON THE LEFT SIDE OF THE HANDLEBAR
NOTE The electric components work only when the ignition switch
is in position “
”.
1) HORN BUTTON ( )
Press it to operate the horn.
2) DIRECTION INDICATOR SWITCH ( )
Move the switch to the left in order to signal your intention to turn
left; move the switch to the right to signal a right turn. Press the
switch at the centre in to cancel the signal.
The indicators are self-cancelling and turn off automatically after
40 seconds or after the vehicle has covered 500 m. The self-
cancelling feature only operates when the vehicle is in motion.
3) DIMMER SWITCH (
- ) / HIGH BEAM FLASHER (PASSING )
Set the dimmer switch to “ ”, to turn on the low beam, set it to
) to turn on the high beam.
Push the dimmer switch to position “PASSING
” to flash the high
beam.
NOTE Release the switch to stop the flasher.
4) MODE BUTTON (MODE)
Press it repeatedly to select the various indications provided by
the multifunction display.
5) HAZARD BUTTON (
)
OPERATION Press the button to activate the emergency stop
blinker. When the blinker is on, it is possible to turn the ignition
switch to (
) and extract the key.
DEACTIVATION
Insert the key into the ignition switch and turn it to position “
”,
press the HAZARD button again to turn off the blinker.