User Guide

63
use and maintenance Atlantic 500
3
4
6
5
7
NOTE Insert the bulb into the bulb holder
matching the two locating pegs with their
guides in the bulb holder.
◆ Fit a new bulb of equal rating. Ensure it is
positioned correctly.
◆ Reverse removal procedure to install the
bulb.
RIGHT turn indicator:
◆ Take out the auxiliary fuse carrier (3) so
as to make disassembly operations easier.
◆ Proceed as described for the left turn
indicator.
NOTE To change bulbs, you can also
remove the loudspeakers covers.
REPLACING THE HEADLIGHT
BULBS
Read page 62 (BULBS) carefully.
The headlight accommodates the following
bulbs:
– Two high beam bulbs (4).
– One low beam bulb (5).
– One parking light bulb (6).
To replace:
◆ Remove the front cover, see page 54
(REMOVING THE FRONT COVER).
LOW BEAM BULBS
Do not pull on the wiring to disconnect the
bulb connector.
◆ Grasp the bulb electric connector and pull
to detach it from the bulb.
◆ Rotate the bulb holder (7) anticlockwise
and extract it from its seat in the reflector.
◆ Remove the bulb.
To refit:
NOTE Fit the bulb into the seat in the
reflector. Ensure the three bulb pegs become
seated in the guides in the reflector seat.
◆ Place the bulb holder (7) into the reflector
seat and turn it clockwise.
◆ Connect the bulb connector.
CAUTION