User Guide

64
use and maintenance Atlantic 500
HIGH BEAM BULBS
◆ Rotate the bulb socket/bulb (1)
anticlockwise and extract it from the seat
in the reflector.
To extract the bulb socket/bulb from the seat,
try to avoid damaging the two tabs (2).
◆ Remove the bulb (2).
◆ Replace it with a new one of the same
rating.
Upon reassembly, carry on the same
operations in reverse order.
2
1
3
4
5
5
6
6
PARKING LIGHT BULBS
Do not pull on the wiring to remove the bulb
holder.
◆ Working from the front of the vehicle, grasp
the bulb holder (3) and pull to extract from
its seat.
◆ Remove the parking light bulb (4) and fit a
new bulb of equal rating.
CAUTION
CAUTION
REPLACING THE TAIL LIGHT
BULBS
Read page 62 (BULBS) carefully.
The tail light accommodates:
- two parking light/brake light bulbs (5).
- Two rear direction indicator bulbs (6).
Replacement:
◆ Raise the saddle, see page 23
(UNLOCKING/LOCKING THE SADDLE).
NOTE The following instructions apply to
both indicators.