Specifications
Electrical system
chap. 6
6-34
Release 00 2002-09
Atlantic 500
HIGH BEAM BULBS
• Turn the bulb socket/bulb (8) counter-clockwise
and remove it from the reflector seat.
To remove the bulb socket/bulb from the connec-
tion, be especially careful not to damage the two
tabs (9).
• Remove the bulb (10).
• Correctly install a new bulb of the same type.
• For reassembly, proceed in reverse order.
CAUTION
PARKING LIGHT BULBS
To remove the bulb socket do not pull the electri-
cal cables.
• Working from the front of the vehicle, grasp the
bulb socket (11), turn it and extract it from the
seat.
• Remove the parking light bulb (12) and replace it
with another of the same type.
CAUTION
CHANGING TAILLIGHT BULBS
Read carefully (BULBS).
The taillight houses:
– Two parking light/brake light bulbs (1).
– Two rear direction indicator lamps (2).
To replace:
• Lift the saddle, see (LOCKING/RELEASING THE
SADDLE).
NOTE The following information refers to a single
indicator, but is applicable to both.
• Remove the knob (3) fastening the set of taillights
to the vehicle.
8
10
9
11
12
1
1
2
2