Specifications

Electrical system
chap. 6
6-35
6
Release 00 2002-09
Atlantic 500
During the following operations do not pull or
force the electrical cables.
• Pull out the set of taillights (4), first removing the
upper part and then distancing it from the housing.
Work very carefully.
Do not damage the tabs and/or slots into which
they are fitted.
• OWorking with the set of taillights in hand, turn it
counter-clockwise and extract the bulb socket (5)
with the bulb (6) of the reflector (4).
CAUTION
CAUTION
• Remove the bulb from its seat.
NOTE Insert the bulb in the bulb socket, carefully
aligning the two bulb pins with their guides in the
socket.
• Correctly install a new bulb of the same type.
NOTE During reassembly, position the lens correctly
in its seat.
Tighten the screw (3) gently and carefully to avoid
damaging the lens.
CAUTION
CHANGING THE FRONT DIRECTION INDICATOR
LAMPS
Carefully read alongside (BULBS).
To replace:
• Removing the front hood, see (REMOVING THE
FRONT HOOD). Alternatively, it is possible to
remove the case covers to reach the bulbs (see
REMOVING THE DASHBOARD).
Work very carefully. Do not damage the tabs and/
or slots into which they are fitted.
CAUTION
For the LEFT direction indicator:
• Working from the front of the vehicle, turn the
support (1) holding bulb (2) clockwise, and extract
both from their housing.
• Push the bulb (2) in slightly and rotate it counter-
clockwise.
• Remove the bulb from its seat.
NOTE Insert the bulb in the bulb socket, carefully
aligning the two bulb pins with their guides in the
socket.
• Correctly install a new bulb of the same type.
• For reassembly, proceed in reverse order.
For the RIGHT direction indicator:
• Remove the secondary fuse box (3) from its seat
to make room to work.
• Then proceed as described for the left direction
indicator.
3
4
5
6
1
2
3