Specifications

ManualsBrandsAprilia ManualsOtherATLANTIC 500

Routine maintenance operations

chap. 2

Release 00 2002-09

2-23

Atlantic 500

MIN

MAX

REPLACING THE COOLANT

Carefully read COOLANT and PRECAUTIONS AND

GENERAL INFORMATION.

Never use the vehicle if the coolant level is below

minimum “MIN”.

Check the coolant level every 1,250 mi (2,000 km)

and after long trips; replace every 16 months.

Switch off the engine and wait until both the

engine and the exhaust system are cool.

DISPOSE OF FLUID CORRECTLY.

Place the vehicle on the center stand.

Remove the front outer shield, see (REMOVING THE

FRONT OUTER SHIELD).

Remove the splash guard, see (REMOVING THE

SPLASH GUARD).

Do not remove the plug of the expansion tank

while the engine is warm, because the coolant is

under pressure and at a high temperature.

May cause serious burns and/or damage in con-

tact with skin or clothes.

Unscrew and remove the cap (1) of the expansion

tank (2).

Place a container with a capacity of more than 91.5

cu. inches (1500 cc) under the base, beneath the out-

let coupling.

Unscrew and remove the hose clamp (3) and discon-

nect the coupling.

Let the coolant flow out completely into the container,

then pour it into a collection container for liquid recov-

ery.

Replace the coupling and fix it into place with the hose

clamp (3).

Pour 73.2 cu. inches (1200 cc) of coolant into the ex-

pansion tank (2).

Top up until the level of the coolant approximately

reaches the “MAX” level.

Do not exceed this level, otherwise the coolant will

spill out while the engine is running.

Replace the filler cap (1).

Remove the inspection cover, see (REMOVING THE

LEFT AND RIGHT INSPECTION COVERS).

Exhaust gases are dangerous to health.

Do not run the engine in closed or badly ventilated

rooms.

CAUTION