Specifications
Electrical system
chap. 6
6-10
Release 00 2002-09
Atlantic 500
CHECKING THE HT COIL
• Remove the left side inspection cover (see
REMOVING THE LEFT INSPECTION COVER).
• Disconnect the terminal (1).
• Unscrew and remove the two screws (2).
• Disconnect the spark plug cap (3).
• Remove the coil (4).
4
1
2
• Use a pocket tester (scale 200 Ω) to measure the
resistance (coil side) between the terminals shown
in the figure (A and B).
• If the resistance is incorrect, replace the coil.
Standard value: 0.6
ΩΩ
ΩΩ
Ω ± 0.1
ΩΩ
ΩΩ
Ω
• Also check the resistance between the high
voltage terminal and the coil casing.
Standard value: 7.4 k
ΩΩ
ΩΩ
Ω
Before measuring, remove the HT cable complete
with spark plug cap.
A
B
CAUTION
3