Specifications
Electrical system
chap. 6
6-12
Release 00 2002-09
Atlantic 500
CHECKING THE RPM SENSOR
With the engine off:
• Disconnect the three-way connector (1) and carry
out the relevant measurements.
• Use a tester (scale x 100 Ω) to measure the
resistance between the sensor terminals, respect-
ing the relevant polarity (see figure).
Standard value: 680
ΩΩ
ΩΩ
Ω ± 10%
• If the resistance is infinite or different from the
prescribed value, the sensor must be replaced.
-
+
Ω
+
1