Technical data
Electrical Equipment
chap. 6
6-34
Release 00 2002-09
Atlantic 500
FULL BEAM BULBS
• Turn the bulb socket/bulb (8) anticlockwise and
extract it from the parabolic setting.
To remove the bulb socket/bulb from its connec-
tion, take special care not to damage the two
housings (9).
• Remove the bulb (10).
• Correctly fit a bulb of the same kind.
• For reassembly, repeat the operations in reverse
order.
CAUTION
PARKING LIGHT BULBS
To extract the bulb socket, do not pull its electric
wires.
• Working from the front of the vehicle, grasp the
bulb socket (11), pull it and take it out of its seat.
• Extract the parking light bulb (12) and replace it
with a new one of the same type.
CAUTION
REPLACING THE REAR LIGHT BULBS
Carefully read BULBS.
The rear light contains:
– Two bulbs for parking/stop lights (1).
– Two bulbs for rear indicator lights (2).
To change them:
• Raise the saddle,see (SADDLE UNBLOCKING
AND BLOCKING).
NOTE The following information is only for one
indicator but is valid for both operations.
• Remove the fixing pommel (3) of the rear lights
assembly of the vehicle.
8
10
9
11
12
1
1
2
2