Technical data

Electrical Equipment
chap. 6
6-35
6
Release 00 2002-09
Atlantic 500
During the following operations do not pull or
force the electrical cables.
• Pull out the rear lights assembly (4) first pulling out
the upper part and then distancing it from its
housing.
Work with caution.
Do not damage the pins and/or their housings.
• Holding the rear lights assembly by hand, turn it
anticlockwise and remove the bulb socket (5) with
the bulb (6) from the parabolic housing (4).
CAUTION
CAUTION
• Remove the bulb from the housing.
NOTE Set the bulb in the bulb socket, ensuring that
the two guiding pins are in line with their respective
slots on the bulb socket.
• Correctly fit a bulb of the same kind.
NOTE During reassembly, correctly place the protec-
tive screen in its housing.
Carefully and gently tighten the pommel (3) in
order to avoid damage to the protective screen.
CAUTION
FRONT INDICATOR LIGHTS BULB
REPLACEMENT
Carefully read BULBS.
To change the bulbs:
• Remove the front hood, see (FRONT HOOD
REMOVAL). As an alternative, it is also possible to
remove the box covers to gain access to the bulbs
(see DASHBOARD REMOVAL).
Proceed with care.
Do not damage the tangs and/or their seatsstro.
CAUTION
For the LEFT indicator:
• Working from the front of the vehicle, turn the
support (1) clockwise with the bulb (2) and remove
both from the housing.
• Gently press the bulb (2) and turn it anticlockwise.
• Extract the bulb from its seat.
NOTE Insert the bulb in the bulb socket, making the
two bulb pins coincide with the relevant guides on the
socket.
• Correctly fit a bulb of the same kind.
• For reassembly repeat the operations in reverse
order.
For the RIGHT indicator:
• Pull the secondary fuse box (3) from its housing in
order to have sufficient space for dismantling
operations.
• Continue as described for the LEFT indicator.
3
4
5
6
1
2
3