Technical data

Cycle parts

chap. 7

7-28

Release 00 2002-09

Atlantic 500

REMOVING THE REAR WHEEL

Read through the paragraph (PRECAUTIONS AND

GENERAL INFORMATION).

Put the vehicle on the central stand.

Allow the engine and the exhaust terminal to cool

down completely.

Remove the exhaust terminal, see (REMOVING THE

EXHAUST TERMINAL).

Unloose and remove screw (5) fixing the pipe guide

clamp.

Unloose and remove the two screws (6) fixing the rear

brake caliper (7).

Release the rear brake caliper (7) from the support

(3).

Unscrew and remove pin (8) fixing the suspension

(11).

WARNING

Keep nut (9) and washer (10).

Release the right suspension (11) of support (3).

Unscrew and remove the wheel pin nut (12) using a

pneumatic gun.

Unloose and remove the two screws (13) fixing the

support (3) to the engine. Keep the washers.

Remove support (3) by pulling it outwards.

Remove wheel (14) by pulling it outwards, including

the rear brake disc.