Technical data
Electrical Equipment
chap. 6
6-10
Release 00 2002-09
Atlantic 500
CHECKING THE HV COIL
• Remove the left inspection cover, see
(REMOVING THE RIGHT AND LEFT
INSPECTION COVERS).
• Disconnect terminal (1).
• Unscrew and remove the two screws (2).
• Disconnect the spark plug (3).
• Remove the coil (4).
4
1
2
• With a pocket multimeter (scale 200 Ω), measure
the resistance (from the coil side) between the
terminals (A e B) indicated in the diagram.
• If the resistance measured is not correct, replace
the coil.
Standard value: 0.6
ΩΩ
ΩΩ
Ω ± 0.1
ΩΩ
ΩΩ
Ω
• Also verify the resistance between the high
voltage terminal and the casing of the coil.
Standard value: 7.4 k
ΩΩ
ΩΩ
Ω
Before measuring, remove the H.V. cable complete
with the spark plug cap.
A
B
CAUTION
3