Technical data

Electrical Equipment

chap. 6

6-20

Release 00 2002-09

Atlantic 500

FAN RELAY CHECK

To verify that the relay is working:

• Remove the seat, see (SEAT REMOVAL).

• Supply the two male terminals (85-86) with a 12V

tension.

• With a multimeter (set to ohm meter mode) verify

the continuity between the other two terminals (87-

30).

Correct value with supply to the relay: 0

ΩΩ

Ω

Correct value without supply to the relay: ∞

ΩΩ

Ω

If the resulting values do not correspond to those

prescribed, replace the relay concerned.

WATER THERMISTOR CHECK

See (COOLANT THERMISTOR FUNCTION CHECK)

on page 6-14.