User Guide
use and maintenance Classic 125
17
#/.42/,3/.4(%2)'(43)$%
/&4(%(!.$,%"!2&IG
The electrical parts work only when the ignition
switch is in position "
n".
1) HEADLIGHT SWITCH (
o - p -
•
)
When the light switch is in position "
•
", the lights are off; when
the switch is in position "
p", the parking lights are on; when
the switch is in position "
o", the low beam or the high beam is
on. The high/low beam can be operated by means of the dim-
mer switch, see p. 16 (CONTROLS ON THE LEFT SIDE OF
THE HANDLEBAR).
2) START PUSH BUTTON (
r)
When the start push button "
r" is pressed, the starter makes
the engine run. For the starting, see p. 28 (STARTING).
3) ENGINE STOP SWITCH (
n - m)
Do not operate the engine stop switch “
n - m” in
running conditions.
This is a safety or emergency switch.
With the switch in position "
n", it is possible to start the en-
gine; the engine can be stopped by moving the switch to posi-
tion "
m".
With stopped engine and ignition switch in posi-
tion "
n", the battery may discharge.
When the vehicle has come to rest, after stopping
the engine, move the ignition switch to position "
m".
c
a
a
Fig. 6