User Guide

62
use and maintenance Habana 50/125 - Habana Custom 50/125
!$*534).'
4(%!##%,%2!4/2#/.42/,
Carefully read p. 43 (MAINTENANCE).
The ideal slack of the accelerator control
should be about 2-3 mm.
To adjust the slack, proceed as follows:
◆
Position the vehicle on the centre stand.
◆
Remove the protection element (1).
◆
Loosen the nut (2).
◆
Act on the adjuster (3), positioned at the
beginning of the accelerator control ca-
ble.
After the adjustment:
◆
Tighten the nut (2), thus locking the ad-
juster (3) and put back the protection ele-
ment (1).
aWARNING
After the adjustment, make sure that the
rotation of the handlebar does not mod-
ify the engine idling rpm and that the
throttle grip returns smoothly and auto-
matically to its original position after
being released.
30!2+0,5'
Carefully read p. 43 (MAINTENANCE).
w v Check the spark plug after the
first 500 km (312 mi), successively every
4000 km (2500 mi); change it every 8000
km (5000 mi).
x u Check the spark plug after the
first 1000 km (625 mi); successively every
6000 km (3750 mi) and change it every
12000 km (7500 mi).
Periodically remove the spark plug and
clean it carefully, removing carbon depos-
its; change it if necessary.
To reach the spark plug:
◆
w v Remove the central inspection
cover, see p. 59 (REMOVING THE CEN-
TRAL INSPECTION COVER).
◆
x u Remove the right inspection
cover, see p. 59 (REMOVING THE
RIGHT AND LEFT INSPECTION COV-
ERS).