User Guide

65
use and maintenance Habana 50/125 - Habana Custom 50/125
#(%#+).'!.$#,%!.).'
4(%4%2-).!,3
Carefully read p. 64 (BATTERY).
◆
w v Remove the battery cover, see
p. 59 (REMOVING THE BATTERY
COVER
w v).
◆
x u Remove the battery (partial re-
moval), see p. 66 (REMOVING THE
BATTERY
x u).
◆
Make sure that the cable terminals (1)
and the battery terminals (2) are:
– in good conditions (and not corroded
or covered with deposits);
– covered with special grease or Vase-
line.
If necessary:
◆
Make sure that the ignition switch is in
position “
m”.
◆
Disconnect first the negative (–) and then
the positive cable (red) (+).
◆
Brush with a wire brush to eliminate any
sign of corrosion.
◆
Reconnect first the positive (red) (+) and
then the negative cable (–).
◆
Cover the terminals with special grease
or Vaseline.
After these operations:
◆
w v Put back the battery cover, see
p. 59 (REMOVING THE BATTERY
COVER
w v).
◆
x u Put back the battery, see p. 67
(INSTALLING THE BATTERY
x u).
2%-/6).'4(%"!44%29
w v
Carefully read p. 64 (BATTERY).
◆
Remove the battery cover, see p. 59
(REMOVING THE BATTERY COVER
w v).
◆
Make sure that the ignition switch is in
position “
m”.
◆
Disconnect first the negative (–) and then
the positive cable (red) (+).
◆
Remove the battery breather pipe.
◆
Remove the battery from its compart-
ment and put it on a flat surface, in a cool
and dry place.
aWARNING
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
◆
Put back the battery cover, see p. 59
(REMOVING THE BATTERY COVER
w v).