User Guide
73
use and maintenance Habana 50/125 - Habana Custom 50/125
#(!.').'4(%(%!$,)'(4
"5,"3
u
Carefully read p. 69 (BULBS).
The headlight contains:
– one parking light bulb (1);
– one low / high beam bulb (2) (halogen).
To reach the bulbs, proceed as follows:
◆
Remove the headlight metal ring, see p.
56 (REMOVING THE HEADLIGHT
METAL RING
w x ).
aCAUTION
Proceed with care.
Do not force the electric wires.
◆
Partially remove the reflector (3).
To change the bulbs, proceed as follows:
PARKING LIGHT BULB
aCAUTION
Do not pull the electric cables to extract
the bulb socket.
◆
Grasp the parking light bulb socket (4),
pull it and remove it from its seat.
◆
Withdraw the parking light bulb (1) and re-
place it with a new one of the same type.
LOW/HIGH BEAM BULB (HALOGEN)
aCAUTION
To extract the bulb electric connector,
do not pull its electric wires.
◆
Grasp the bulb electric connector (5),
pull it and disconnect it from the bulb (6).
◆
Release the clip (7) that holds the bulb
(6).
◆
Extract the bulb from its seat.
For the reassembly:
NOTE Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.
◆
Correctly install a new bulb of the same
type.
◆
Put back the clip (7).
◆
Connect the bulb electric connector (5).