Technical data

58
use and maintenance SL mille
!33%-",).'4(%0).3&/24(%
2%!23500/2434!.$
&
◆
Position the vehicle on the side stand on
firm and level ground.
◆
★ Position the pin (1) on the appropriate
seat on the rear fork.
◆
★ Screw and tighten the screw (2) in the
appropriate threaded hole in the rear
fork.
0/3)4)/.).'4(%6%()#,%/.
4(%2%!23500/2434!.$
&
NOTE Have someone help you keep the
vehicle in vertical position with the two
wheels on the ground.
◆
★Loosen the knob (3).
◆
★Move the fork support (4), positioning it
so that the width corresponds to the dis-
tance between the two pins (1) on the
rear fork.
◆
★Tighten the knob (3).
◆
Make the two housings on the stand (4)
coincide with the two pins (1) provided
on the vehicle.
◆
Rest one foot on the rear part of the
stand (5).
◆
Push the stand (5) downwards until it
reaches the end of its stroke.
0/3)4)/.).'4(%6%()#,%/.
4(%&2/.43500/2434!.$
&
◆
Position the vehicle on the appropriate
rear support stand, see beside (POSI-
TIONING THE VEHICLE ON THE REAR
SUPPORT STAND
&).
◆
Insert the two ends of the stand (6) in the
two holes (7) positioned on the lower
ends of the front fork.
◆
Rest one foot on the front part of the
stand (6).
◆
Push the stand (6) downwards until it
reaches the end of its stroke.
Ing-02.fm Page 58 Friday, December 17, 1999 11:16 AM