Owner`s manual

LUBRICATION

3-47

ine 450 - 550

3.4. CYLINDER AND PISTON

3.4.1. REMOVAL

• Before removing the cylinder it is necessary to remove

the head, see (REMOVING THE HEAD)

• Loosen and remove the inspection screw (2), remove

O-ring (mind possible coolant spillage).

• Using special tool (no. 9100897), remove barrel (1)

and keep O-ring.

NOTE Before removing the gudgeon pin circlip, block off the

casing opening with a clean cloth to prevent the circlip from

falling inside the crankcases.

• Remove the gudgeon pin circlip.