Owner`s manual

LUBRICATION

3 - 58

ine 450 - 550

• Install the wing washer(s).

WARNING

Refit washers restoring their original number

and position.

• Install the clutch hub nut.

• Using clutch locking tool (no. 9100896, special tool),

tighten clutch hub nut to the specified torque.

• Bend the locking washer.

• Lubricate driving plates and driven plates with gearbox

fluid, see (LUBRICANT TABLE).

• Install the first friction plate, the first metal 1.5 mm plate

and then one friction plate with the reference tooth in

the same groove as the first plate and a metal 2 mm

plate continuing in this way. The metal 1.5 mm plate

and the last friction plate are the top ones and the latter

should be positioned with reference tooth offset by one

groove with respect to other plates.