User Guide

21
use and maintenance RSV mille - RSV mille R
◆ Press the push button l until, after
about five seconds, all the writings (12)
on the left display start blinking.
◆ Release the push button l.
◆ Press the push button k to change the
unit of measurement from “km” to “mi”
(from “km/h” to “MPH”) or viceversa.
◆ To confirm the setting, press the push
button l for about five seconds.
SETTING THE INSTANTANEOUS,
MAXIMUM AND AVERAGE SPEED
(LEFT DISPLAY)
NOTE Two seconds after the vehicle
has started moving, the instantaneous
speed is automatically shown on the dis-
play, even if a different function is set.
When the ignition key is rotated to position
“2”, the instantaneous speed (9) and the
partial number of kilometres/miles covered
“trip 1” (10) appear on the left display.
Resetting “trip 1” (10): with the odometer set
on the instantaneous speed function, press
the push button r for about two seconds.
◆ To display the maximum speed (14) and
the distance “trip 1” (10), press the push
button k for about one second. The
writing “V max” (15), the maximum
speed (14) and the distance “trip 1” (10)
are displayed.
Resetting the maximum speed (14): with
the odometer set on the “V max” function,
press the push button r for about 2 sec-
onds.
NOTE The measurement of the maxi-
mum speed is relevant to the distance cov-
ered from the last setting to zero of the max-
imum speed itself. The distance “trip 1” (10)
shown on the display indicates the number
of kilometres/miles covered from the last
setting to zero, to the distance “trip 1”.
◆ To display the average speed (16) and
the distance “trip 2” (17), press the push
button k again for about 1 second.
The writing “AVS” (18), the average speed
(16) and the distance “trip 2” (17) are dis-
played.
Resetting the average speed (16) and the
distance “trip 2” (17): with the odometer set
on the “AVS” function, press the push but-
ton r for about 1 second.
NOTE The measurement of the average
speed is relevant to the distance “trip 2”
(odometer).
The distance “trip 2” (17) shown on the dis-
play indicates the number of kilome-
tres/miles covered from the last setting to
zero.
If more than 1000 km (625 mi) are covered
without setting “trip 2” to zero, the value of
the average speed will be wrong.
◆ To display the instantaneous speed (13)
and the distance “trip 1” (10), press the
push button k again.
km/hMPH
km
mi
AVSVmax
9
10
km/hMPH
km
mi
AVSVmax
10
15
14
km/hMPH
km
mi
AVSVmax
18
16
17
RSVmille-R-UK.book Page 21 Friday, November 17, 2000 3:13 PM