User Guide

29
use and maintenance RSV mille - RSV mille R
!58),)!29%15)0-%.4
5.,/#+).',/#+).'4(%
0!33%.'%23%!4W
◆ Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆ Introduce the key (1) in the seat lock.
◆ Rotate the key (1) anticlockwise, lift and
withdraw the seat (2) from behind.
NOTE Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove/tool kit compartment.
To lock the seat (2), proceed as follows:
◆ Introduce its front part under the passen-
ger grab strap (3).
◆ Position the seat and press it, making
the lock snap.
aWARNING
Before leaving, make sure that the seat
(2) is properly locked.
NOTE Upon request it is possible to
supply the glove/tool kit compartment cov-
er m (4) to be used instead of the passen-
ger seat.
If the glove/tool kit compartment cover is
used, the passenger grab strap must be
folded and put inside the glove/tool kit
compartment: for the installation and re-
moval, see p. 29 (UNLOCKING/LOCKING
THE PASSENGER SEAT W).
A useful compartment is available under
the glove/tool kit compartment cover; to
reach it, it is sufficient to release and re-
move the flap (5).
RSVmille-R-UK.book Page 29 Friday, November 17, 2000 3:13 PM