User Guide

30
use and maintenance RSV mille - RSV mille R
5.,/#+).',/#+).'4(%
',/6%4//,+)4#/-0!24-%.4
#/6%2w
◆ Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆ Introduce the key (1) in the lock.
◆ Turn the key (1) anticlockwise, raise and
withdraw the glove/tool kit compartment
cover (2) from behind.
A useful compartment is available under
the glove/tool kit compartment cover; to
reach it, it is sufficient to release and re-
move the flap (3).
NOTE Before lowering and locking the
glove/tool kit compartment cover (2), make
sure that you have not left the key in the
glove/tool kit compartment.
To lock the glove/tool kit compartment
cover (2):
◆ Introduce the lower front projections in
the relevant recesses on the rear part of
the fairing.
◆ Position the glove/tool kit compartment
cover in its seat and press it, so that the
lock snaps.
aWARNING
Before leaving, make sure that the
glove/tool kit compartment cover (2) is
correctly locked.
RSVmille-R-UK.book Page 30 Friday, November 17, 2000 3:13 PM