AprixTab64C manual
Content Content .............................................................................................................................................. 1 1Introduction ..................................................................................................................................... 3 1.1 Acknowledgement ............................................................................................................... 3 1.2 Announcements .................................................
8.2 Uninstall ............................................................................................................................ 50 9 Troubles Shooting ........................................................................................................................
1Introduction 1.1 Acknowledgement Thanks for your purchase of our product. Aprix Tab64C，is a 10 inches highclear board computer. Its CPU is MT8167, it is based on Android 7.0operation system, and easy to expand the third application procedure. The product is designed with various functions, including WIFI, BT, GPS,FM，HDMI and so on.
information. For further details, please refer to the safety instructions andannouncement. Never use the MID when driving car, in order to ensure safe driving. In the medical area, please abide by related rules and regulations. Please shut down the MID when it is near to the medical area.
1.4 Abbreviation/Terminology Abbreviation/Terminology Full Name Description MID Mobile Internet Device Mobile Internet Terminal WIFI Wireless Fidelity Base on IEEE 802.11 ac,b,g,n standard wireless LAN TF TransFlash Alternative name Micro SD,super miniature memory card 2 MID Introduction 2.1 MID Operation and Preparation Battery Charging If this navigator is first used, please use AV adaptor to fully charge it. 1. Apply the power adptor to charge for MID. 2.
Return button Downloading Display Home button recently-used application Current electric WIFI connected, internet is volume. available Reminder board Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.
3 Quick Start Guide 3.1 Keys Function Keys Funcction Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume HOME button （home） Click it in any interface will return to main interface. Back button（back） click it in any interface will return to previous menu This button will display in menu interface. Menu button Setting button display recently browsed history 3.
3.3 Open and Close of the Screen Screen will be closed on its own when no operation happens. 1. Screen will be closed on its own if no operation happens for some time to save battery power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen.
procedure move, you can press on this item. Quickly slide or slide Quickly slide or slide indicates make quick vertical or horizoncial movement by finger. Pull Before you pull, you need to hold the it with strenghth until you pull it into the position you want. Rotate For most pictures, you only need to retate the MID sidewise to change the screen direction from horizoncial to vertical. For instance, when you are typing wods, and watching movies. 3.5 Home Page Main interface as below picture 3.
extended pictures, as Picture 3.3. Picture 3.3 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.4. 2. Then click the overlayed icons, the applications can be folded, as Picture 3.5.
Picture 3.4 Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2.
your finger to delete the icon. Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper. 3.6 Visit Application Procedures in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Click Picture 3.6 Return to home page 3.
Picture 3.7 Copy the document into memory card 1. Connect the MID to computer with USB cable. 2. As MID storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “removable disc”. 4. Copy the documents you need into “removable disc”. 5. After copying finishes, click “shutdown the USB storage configuration” touninstall.
2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your MID. 4. Tick the typing method you want. Use and switch of input method ⑤ ④ ① ② Picture 3.8 ③ 1 switch the capital and small letter 2 switch the mode of words input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left og the cursor.
3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, MID will automatically search theavailable Wifi wireless internet. As Picture 4.1 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect. Picture 4.1 2.Add Network 1) Click the wi-fi list below menu, as Picture 4.
Picture 4.2 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.3 Picture 4.3 3.
4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click bluetooth and open it. 3. If somebody open bluetooth in your surroudings, click search device in right above, then MID will automatically search the bluetooth device nearby. As picture 4.4 Picture 4.4 4. Click the availableBluetooth device, it will popup request window, enter into related password, and match the device to connect. 5.
Picture 4.5 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.5, as Picture 4.7, select rename tablet, you can rename it as you want Picture 4.6 2.Display the file you received Choose display the file you received in Picture 4.6 you can view download and upload files.
4.3 Data Usage Check WIFI data usage click Data Usage, as Picture 4.7 Picture 4.7 4.4 More 4.4-1 Airplane Mode Airplane Mode can turn off WIFI function quickly, when airplane mode is turned on, WIFI can’t get any signal, then airplane mode is turned off, WIFI module will recover to previous state. 4.4-2 VPN Open VPN, click add VPN network, as Picture 4.8. Input name and server address, then save.
Picture 4.8 Click VPN, as Picture 4.9, input VPN user name and password, click connect. Picture 4.9 4.5 Display 4.5-1 Adjust the screen brightness 1. Click Setting application procedure. 2.
3. Drag the portlito to adjust the brightness volume.as Picture 4.10 Picture 4.10 4.5-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—live wallpapers---gallery--- live wallpapers---wallpaper, as Picture 4.11 Picture 4.
4.5-3 When device is rotated System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor. 4.5-4 Sleep 1. Click setting application. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.12 Picture 4.12 4.5-5 Font size Click font size to adjust the font size, as Picture 4.
Picture 4.13 4.6 Contextual Model 1. Click setting application. 2. Click Sound.as Picture 4.14 Picture 4.
4.7 Storage Open setting function, click memory, click preferred install location, you can choose isntall new application to choose preferred install location. Check SD card and MID storage space. 1. Enter into setting application. 2. Click storage, check storage space. 1. Internal storage (1) System storage System storage is the spcae MID leave for system file, asPicture 4.15. it can’t be viewed. Picture 4.15 2.
Picture 4.16 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.8 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.17 4.9 Application program 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application and check system used storage space and left space.As Picture 4.18 Picture 4.
4.10 Account 1. Select setting application 2. Open Account as Picture 4.19 Picture 4.19 3. Click add account, as Picture 4.20 Picture 4.
4. After successfully load, it will open the sync function, as Picture 4.21 Picture 4.21 4.11 Location service 1. Clicksetting application 2. ClickLocation 3. select Mode as Picture 4.22 Picture 4.
4.12 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click Security. 3. Click Screen lock . 4. Choose pattern in text setting area. 5. Click next following the remind message. 6.
3. Click Screen lock . 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Ener new PIN code again and click confirm. Set unlock password Click setting application in main interface. 1. Click safe. 2. Click screen locked. 3. Set password in text seting area. 4. Set new password(letters and numbers) and then click continue. 5. Enter the password again and the click confirm. Unknown source 1. Click setting application in main interface. 2. Click Security. 3.
4.13 Language and Input Method 1. 2. 3. Click setting application in main interface select language and input choose language to switch language, as Picture4.25 Picture 4.25 Keyboard and input methods choose keyboard setting, click input language, as Picture 4.26 Picture 4.
Choose the language you want to change in the language list, as Picture 4.27 Picture 4.27 4.14 Backup and Reset Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. If you need to recovery factory reset, please click reset, as Picture 4.28, if you need to formulate NAND, please click reset tablet.
Picture 4.28 4.15 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
4.16Schedule power on and off 1. Click Setting application procedure 2. Click Schedule power on and off 3. Operate as below Picture 4.30 Turn on/off fixed-time startup Turn on/off fixed-time shutdown Picture 4.30 4.17Accessibility 4.17-1. Large size Click it to make system font large size 4.17-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.17-3. Touch and hold delay Click touch and hold delay to increae time, as Picture 4.
Picture 4.31 4.17-4Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.18Engineer Selection 4.18-1 USB adjustment After opening USB adjustment, you can use some software to read MID software, but when USB adjustment is turned on, USB storage needs to manual adjust. 4.18-2 Keep awaken state If you open keep awaken state, it wll never auto sleep when your MID is charging. 4.
4.19 About Tablet Check MID state 1. Check Setting application. 2. Click about tablet, check state message, model, Android version, version No and so on. 3. Click state message, check battery state, battery volumne, IP address. Picture 4.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music icon to enter into music player, click the music you want to play, as Picture 5.1: Album Picture 5.
Picture 5.2 Previous song Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.2 Next song 5.2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2.
1. Click menu key, display the menu selection. 2. Click edit. 3. Adjust teh brightness, style, color, antialias setting in selection. 4. Click save. 5. If you want to give up edit, click return key, click not to return to picture browse. 5.3 Camera In the main interface or desktop, click camera application procedure , enter into camera Operation of camera ,Switch camera: choose Menu key, click switch front/back camera, as Picture 5.3 Picture 5.3 5.
Picture 5.4 Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your MID can’t search any frequency band.
6 Internet 6.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, asPicture 6.1 Address column menu Picture 6.1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 6.1.
Picture6.1.2 6.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 6.2 Picture 6.2 a.
1． After you click the sending email icon , you can see the email setting guide, which can help you to set. 2． Input your email address and password. 3． Click “Next step” button, choose your email type is POP3 or IMAP. 4． Click “Next Step” button to check whether the email box servicer can receive or send emails 5． Input the email account and display the email subiject, and click finish. 6． If the email box is available, you will enter into your mail box automatically. b.
Picture 6.
7 Other Application Procedures 7.1 Clock Click Clock procedure, enter into below interface as Picture 7.1. There are clock, picture, music and homepage buttons. Picture7.1 7.2 Calculator 1. Click . 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer 7.2 7.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager.
Picture7.3 a、Copy, cut, delete, rename the files and folder: choose the file or folder, long pressthe file or folder to enter into the interface as Picture 7.4, you can operate the file or folder. Picture7.4 b、Paste the copy or cut file: choose the file you want to paste, choose right top into Picture 7.4, choose right top icon to enter into Picture7.
Picture7.5 C. Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list d、Install apk file：Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 7.4 Recorder In the main interface or desktop, click recorder icon record key to start record.
8 Installation of Procedures 8.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 8.2 Uninstall Uninstall application procedure 1.
9 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. MID can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the MID and wireless router in certain distance, and no wall or other barrier between them. Ensure the user name and password both correct.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when worn on the body, as described in this user guide, is 0.174W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements).
