Configuration Manual

2 General information
2.1 About this document
This manual provides information for optimal configuration and
efficient operation of the device.
Personnel must carefully read and fully understand this manual
before performing any installation or configuration tasks.
The figures in this manual are for information only. Actual design
may differ from illustrations.
This document is addressed to system integrators.
All information in this manual refers to firmware version 1.12 and
hardware
APS.
Modifications to the functionality which will be implemented through
future software updates will be described in separate release notes
or in an updated version of the manual.
Notes and safety instructions are marked by symbols in this
manual.
For safety instructions the relevant symbol and words indicate the
severity of the danger.
NOTICE!
This combination of symbol and signal word indi-
cates a potentially dangerous situation, which can
lead to property damage, data loss or misuse of
the device if not avoided.
This symbol highlights useful tips and recommen-
dations as well as information for efficient and
trouble-free operation.
2.2 About the manufacturer
Service requests regarding the device can be sent to the following
e-mail address:
people.counter
[e-mail]
The general contact information is shown on page 2.
The warranty information is included in the general terms and con-
ditions of Hella Aglaia.
Target group
Software and hardware version
Notes
Service requests
Warranty information
General information
About the manufacturer
6 18.06.2019
The reproduction, distribution and utilization of this document as well as the communication of its contents to others
without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
Draft