Assembly Instructions

15 / 36
The reproduction, distribution and utilization of this document as well as the communication of its contents
to others without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
02.06.2022
Version 1.0
Technical Data
APS-90-Lite
Fig. 6: RJ-45
Ethernet interface
(arrow "A": optics orientation)
Fig. 7: Mini-Fit I/O Interface
("A": optics orientation)
P
Pi
n
n Allocatio
n
n o
n
n Device
Pi
n
n no. Name Ethernet Po
E
E mode
A
Po
E
E mode
B
1 TxRx A + Transmit/Receive A (positive polarity) DC +
2 TxRx A − Transmit/Receive A (negative polarity) DC +
3 TxRx B + Transmit/Receive B (positive polarity) DC −
4 TxRx C + Transmit/Receive C (positive polarity) DC +
5 TxRx C − Transmit/Receive C (negative polarity) DC +
6 TxRx B − Transmit/Receive B (negative polarity) DC −
7 TxRx D + Transmit/Receive D (positive polarity) DC −
8 TxRx D − Transmit/Receive D (negative polarity) DC −
4.2.2 I/O Port
Pi
n
n Allocatio
n
n o
n
n Device
Pi
n
n no. Name Description
1 PWR + DC voltage supply +
(12 ... 30 V)
2 IN0 + Programmable input +, potential-free
(typically used for a door contact)
3 IN1 + Programmable input +, potential-free
(typically used for a door contact)
4 OUT + Programmable output +, potential-free
5 GND DC voltage supply -
6 IN0 - Programmable input -, potential-free
(typically used for a door contact)
7 IN1 - Programmable input -, potential-free
(typically used for a door contact)
8 OUT - Programmable output -, potential-free